Height |
This option is not available if the selected symbology has a symbology-specific option for Row Height, including 2D Row Height and/or 1D Row Height. |
Use the Height option on the Symbology and Size property page to specify the length of the bars in a barcode from the top edge to the bottom edge. The length of the bars in the tallest possible barcode can be no taller than the full height of the page, while the length of the bars in the shortest possible barcode can be no shorter than .001 inches.
To change the height of a barcode by using the mouse
To change the height of a barcode by using the Symbology and Size property page
If you are using a contact scanner, such as a wand, avoid specifying very short barcodes. Barcodes that have very short bars are difficult to scan with contact scanners because most people cannot hold their hands steadily enough to stay within the boundaries of the barcode throughout the scan. If you are using a non-contact scanner, such as a moving beam laser gun, you will not have this problem. |