套接字属性页 |
“端口”属性页用于为集成配置以下属性。
网络套接字
协议:指定使用的套接字协议。
网络地址:
Accept connections on all local network interfaces:Specifies that the socket accepts connections to all network addresses.
Accept connections on specific local address:Specifies that the socket accepts connections to only the local IP address that you specify.
Establish connection to remote machine:Specifies that the socket connects to the specified remote TCP/IP server.Available when Protocol is set to TCP.
端口:指定网络地址端口。
通信设置
The following settings are available only when Protocol is set to TCP.
读取超时:指定等待套接字读取数据的时间量。
写入超时:指定等待套接字写入数据的时间量。
最大连接数:指定最大连接数。Not available when Network Address is set to Establish connection to remote machine.
Reestablish connection after:Specifies the number of seconds that elapse before a connection is reestablished.Available when Network Address is set to Establish connection to remote machine.
连接协议
当客户端连接时发送确认消息:指定在进行套接字连接时发送的消息。在输入框中输入响应消息。也可以通过添加变量来指定消息。还可以向您输入的值添加特殊字符。
|
When Network Address is set to Establish connection to remote machine, this option is labeled Send acknowledgement message when connection is established. |
相关主题