Printer Menu |
Use the Printer menu to manage the selected printers in the Printers pane. The options that are available on the Printer menu and submenus vary depending on printer selection, driver capabilities, security settings, and the current state of the printer.
The following options are available:
Pause Printing: Pauses printing on the selected printers that are not currently paused.
Resume Printing: Resumes printing on the selected printers that are paused.
Cancel All Jobs: Cancels all jobs in the print queues of the selected printers.
Open Print Queue: Opens the Windows print queue for the selected printer. Available when only one local printer is selected.
Set as Default Printer: Sets the selected printer as the default printer. Available when only one local printer that is not currently the default printer is selected.
Printing Preferences: Opens the Windows Printing Preferences dialog for the selected printer. Available when only one local printer is selected.
Connect: Opens a local connection to a remote printer. Available only for remote printers that are not currently connected to the local computer.
Disconnect: Closes a local connection to a remote printer. Available only for remote printers that are currently connected.
Rename: Renames the selected printer. Available when only one local printer is selected.
Delete: Deletes the selected printers.
Print: Opens a submenu that includes the following print options:
Windows Test Page: Prints the Windows test page.
Simple Test Page: Prints a simple test page that is provided by the printer driver.
Printer Test Page: Prints the printer's internal diagnostic test page, if one is available.
Blank Page: Prints a blank page.
Supported Fonts: Prints a list of fonts that are supported by the printer's firmware.
Supported Barcodes: Prints a list of barcode symbologies that are supported by the printer's firmware.
File List: Prints a list of files that are stored in the printer.
Format List: Prints a list of formats that are stored in the printer.
Graphics List: Prints a list of graphics that are stored in the printer.
Font List: Prints a list of fonts that are stored in the printer.
Configuration: Prints the printer's current configuration.
Maintenance: Opens a submenu that includes the following printer maintenance options:
Cut: Cuts off any labels that were fed from the printer.
Feed: Feeds a blank label.
Reset Printer: Resets the printer, which is equivalent to turning the printer off and then turning it back on.
Flush Cache: Flushes the printer's cache memory.
Sensor Profile: Performs a sensor profile on the printer.
Set Label Length: Feeds several labels to determine the label length.
Run Calibration: Feeds several labels to calibrate the printer to the spacing between label gaps or marks.
Send File To Printer: Sends a file that consists of printer commands to the printer. The driver does not process the contents of the file.
Properties: Opens the Printer Properties dialog for the selected printers.