Shell Command

Command

• Source: Specifies the source for the command that is sent.

  • Embedded Command(s):

  • Value: Use the input box to enter the data that you want the action to use. Alternatively, you can add a variable to specify the data or add a special character to the value that you enter.

  • Import: Opens the Open File dialog so that you can browse to and select a file that contains the data that you want. The contents of the file are imported into the Value input box.

  • Export: Opens the Save File dialog so that you can save the contents of the Value input box as an external file. You can save the value as a new file or replace the contents of an existing file.

  • Edit embedded value : Opens the Value for Embedded Source dialog, where you can edit the value of the embedded source.

  • Variable:

    • Variable: Enter the variable that you want to use for the source. Alternatively, you can add a variable.

  • External File:

    • Location: Specifies the file system where the source folder exists. File systems or locations can include local file systems or network shares, Librarian, or a supported cloud storage location. For more information about supported cloud storage locations, refer to the Administration Console Cloud Storage Page.

    • File Name: Specifies the file path. You can enter the folder location and file name or click Browse to locate and select the file that you want. Alternatively, you can add a variable to specify the file or add a special character to the value that you enter.

    • File Encoding: Specifies the encoding that is used by the source file.

• Run as a batch: Specifies that the specified file is run as a batch file. Available when the Source value is set to External File and the Location value is set to Computer/Network.

  • Parameters: Specifies the parameters that are passed to the batch file. Available when Run as a batch is selected.

• Stop executing if any shell command(s) fails: Specifies that the action stops if a command fails. If this option is not selected, command failures are ignored, and the action is always considered successful. Available when Run as a batch is not selected.

• Wait for all shell command(s) to complete: Specifies that the commands are not run until after a response is received. If this option is not selected, the commands are run without waiting for a response.

  • Execution Timeout (Seconds): Specifies the amount of time that the action waits for the command to run before the action times out and exits.

Output

• Send command output to message log: Logs the shell command output to the message log.

• Save command output and errors to variable: Specifies the variable to which the command output and errors are saved. Enter the variable that you want in the text box. Alternatively, you can add a variable.

• Save command errors to variable: Specifies the variable to which the command errors are saved. Enter the variable that you want in the text box. Alternatively, you can add a variable.

Action

• Name: Specifies the name of the action. You can replace the default name by entering a new name in the field.

• Description: Specifies a description for the action.

• Run Action: Specifies how often you want to run the action.

  • Always: Specifies that the action runs each time the process file is run.

  • Never: Specifies that the action does not run when the process file is run.

  • Conditionally, based on variable: Specifies that the action runs only when a selected variable meets a specified condition. Use this option in situations in which there is only one condition that determines whether the action runs. After you select this option, you can create the conditional statement in the input box.

    Input box controls

    • Variable: Specifies the variable that you want to use for the conditional statement. Enter the variable in the input box. Click to see a list of recently used variables, or click Variable or More Variables to open the Insert Variable dialog.

    • [Relational Operator]: Specifies the relational operator to use for the conditional statement. Click the existing operator to display a list of additional operators, and then click the one that you want to use. For more information, refer to Relational Operators. The operators that are available in the list depend on whether you selected Text or Decimal for the Type option.

    • Value: Specifies the values to use for the conditional statement. To add a value, click , click <enter a value>, enter the value that you want, and then press Enter. To delete a value, use the secondary mouse button to click it, and then click Delete. Some operators, such as Is blank and Is not blank, do not require a value to be specified. In these situations, the Value field is not available.

    • Type: Specifies whether the conditional statement is evaluating a text or decimal value.

       

  • Conditionally, based on expression: Specifies the conditions under which the action runs. Use this option for situations that require more than one conditional statement. When you select this option, you can create the conditional expression in the input box by creating the conditional statements that you want. You create and edit your conditional expression on the Tree View tab. Click the Text View tab to see a read-only text view of the conditional expression.

    Input box controls (Tree View tab)

    • [Conditional Joiner]: Specifies the conditional joiner for the conditional statements within the group. The default conditional joiner is And.

      Click the existing conditional joiner to display a menu that enables you to configure your conditional expression in one of the following ways:

      • And, Or, NotAnd, NotOr: Click the conditional joiner in the list that you want to use for the conditional statements. For more information about the supported conditional joiners, refer to Conditional Joiners.

      • Add Condition: Click to add another conditional statement to the current group.

      • Add Group: Click to add a subgroup of conditional statements to the current group.

      • Remove Group: Click to delete the subgroup. Available when you open the menu from a subgroup.

      • Clear All: Click to delete all conditional statements (including subgroups). Available when you open the menu from the top-most group.

    • : Click to add a conditional statement to the group that is associated with that joiner. Visible to the right of each conditional joiner in your expression.

    • :  Click to delete the conditional statement. Visible to the right of an existing conditional statement when you point to the statement.

    • Variable: Specifies the variable that you want to use for the conditional statement. Enter the variable in the input box. Click to see a list of recently used variables, or click Variable or More Variables to open the Insert Variable dialog.

    • [Relational Operator]: Specifies the relational operator to use for the conditional statement. Click the existing operator to display a list of additional operators, and then click the one that you want to use. For more information, refer to Relational Operators. The operators that are available in the list depend on whether you selected Text or Decimal for the Type option.

    • Value: Specifies the values to use for the conditional statement. To add a value, click , click <enter a value>, enter the value that you want, and then press Enter. To delete a value, use the secondary mouse button to click it, and then click Delete. Some operators, such as Is blank and Is not blank, do not require a value to be specified. In these situations, the Value field is not available.

    • Type: Specifies whether the conditional statement is evaluating a text or decimal value.

User Account

• Inherit from parent action: Specifies that the action inherits the user account credentials that are specified on the Actions property tab. Alternatively, if the action is part of a Group action, it inherits the user account credentials that are specified on the immediate parent Group action’s property tab.

• Specify user credentials: Specifies that the action runs by using the credentials that are specified.

Error Handling and Diagnostics

• Ignore errors and continue running actions: Specifies that if the action fails, the remaining actions continue to run. When this option is not selected and the action fails, the resulting behavior depends on several factors, as follows:

  The action is within a Group action

  • If you specified Sequentially for the Execute Actions property on the Group action's Execution tab, no further actions within that Group action are run. No actions outside of this Group action are affected.

  • If you specified In Parallel for the Execute Actions property on the Group action's Execution tab, the errors are ignored, and the other actions within that Group action are run. No actions outside of this Group action are affected.

  The action is not within a Group action

  • If you specified Sequentially for the Execute Actions property on the Actions Execution tab, no further actions within the process are run.

  • If you specified In Parallel for the Execute Actions property on the Actions Execution tab, the errors are ignored, and the other actions within the process are run.

• Retry if failed: Specifies that if the action fails, the Integration Service tries to run it again.

  • Maximum retries: Specifies the maximum number of times the Integration Service tries to run the action again. Available when the Retry if failed option is selected.

  • Retry interval: Specifies the length of time the Integration Service waits after the action fails before it tries to run the action again. Available when the Retry if failed option is selected.